Single-Stage Insulation Attachment The InsulFast T3 system is 4 times faster than traditional pin installation. It allows the installer to fix the insulation in one step without the use of adhesives or insulating pegs. Gain of days compared to the traditional method of fixation of the insulation. Saves time and labor costs. Secure the insulation directly to concrete, hollow blocks and steel studs. No need to stick and glue the insulation plugs. Fixation is consistent and clean. The tool allows you to fix the insulation in tight spaces through pipes and automatic fire extinguishing systems. The T3FUEL can take more than 1000 photos before having to be replaced. The system can be used all year round: unlike pins, you will not be limited by cold temperatures or wet surfaces. Reduced operator fatigue Thermal bridge: 99.5% efficiency. Insulation pin capacity from 1 "to 6". Automatic adjustment of the power.

• - Thermal efficiency greater than 99%. Approved by major manufacturers of weather resistant barriers. Fixation is consistent and clean. The tool allows you to fix the insulation in tight spaces through pipes and sprinkler systems. The T3FUEL can take more than 1000 photos before having to be replaced. The T3 insulation system allows you to install the insulation directly on the concrete, which makes you less dependent on the scaffolding.


• -

• - Reference T3IGT


• - Length: 14.0"


• - Height: 20"


• - Weight: 7.9 lb.


• - Tool Compression Force lbs (kg): 7.7 (3.5)


• - Impact Strength: 100 J


• - Insulation Attachment Capacity : 1 to 6 inches


• - Tether insertion force: Very low


• - Fuel cell: 1000 shots


• - Battery (charged): 3000 shots


• - Regulation: Automatic license required: No


• - Trigger lock: Yes


• - Recoil: Extremely weak


• - Fatigue of the operator: Low

• -