The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

• - 5.5lbs, lightweight and well balanced for easy maneuverability.


• - Side loading magazine convenient and easy for quick replenishmen.


• - Tool-less depth of drive adjustment for precision nailing/flush driving.


• - Carbide tipped push lever reduces wear.


• - Rubber pads help keep nailer from sliding off roof when not in use.


• - Quick driving for maximum efficiency.


• - Pneumatic power feed and return allows tool to operate in the harshest conditions.


• - Long-lasting rubber grip for added comfort.

• - Fastener Diameter Range: 0.120


• - Magazine Capacity: 120


• - Magazine Loading: Side


• - Air Inlet: 3/8"


• - Operating Pressure: 70-120psi


• - Jam Clearing: Open-nose


• - Depth Setting: Tool-Less


• - Actuation: Contact, Sequential Optional


• - L x W x H : 9-27/32" x 4-5/8" x 10-3/8"


• - Tool Weight: 5.5 lbs


• - Fastener Type: Coil, Wire Collation


• - Magazine Angle: 16-Degrees


• - Fastener Length Capacity: 7/8" to 1-3/4"

• - Safety Glasses (875769)


• - Magazine Shingle Guide Assembly (883370)